Tunnel oven drying line curing machine pppe plastic glass bottle flat round surface UV curing machine

technical parameter1. Name: UV curving machine2. Dimension (length width height) 2150 * 750 * 1750mm3. 42 pieces of aluminum taper hanger4. Belt width 440mm5. Adjustable product height 1 ~ 350mm6. Maximum bottle diameter: 150 mm7. Five stage speed regulation of conveyor belt speed 1 ~ 6m / min8. A set of 5.6kw UV system9. Tube l

Featured Products

technical parameter
1. Name: UV curving machine
2. Dimension (length width height) 2150 * 750 * 1750mm
3. 42 pieces of aluminum taper hanger
4. Belt width 440mm
5. Adjustable product height 1 ~ 350mm
6. Maximum bottle diameter: 150 mm
7. Five stage speed regulation of conveyor belt speed 1 ~ 6m / min
8. A set of 5.6kw UV system
9. Tube length 460mm
10. The wavelength is 365nm
11. Voltage 380VAC 50 / 60H
12. The total power is 7kw13 and the weight is about 380K
Tunnel Furnace Drying Line Curing Machine Pppe Plastic Glass Bottle Plane Round Surface UV Curing MachineTunnel Furnace Drying Line Curing Machine Pppe Plastic Glass Bottle Plane Round Surface UV Curing MachineTunnel Furnace Drying Line Curing Machine Pppe Plastic Glass Bottle Plane Round Surface UV Curing MachineTunnel Furnace Drying Line Curing Machine Pppe Plastic Glass Bottle Plane Round Surface UV Curing MachineTunnel Furnace Drying Line Curing Machine Pppe Plastic Glass Bottle Plane Round Surface UV Curing MachineTunnel Furnace Drying Line Curing Machine Pppe Plastic Glass Bottle Plane Round Surface UV Curing MachineTunnel Furnace Drying Line Curing Machine Pppe Plastic Glass Bottle Plane Round Surface UV Curing Machinematters needing attention
(1) Ensure that the equipment is properly ventilated and operated in a normal environment.
(2) It is strictly forbidden to look directly into the cavity from the inlet or outlet to prevent ultraviolet ray from damaging the human body
(3) For a system with multiple UV lamps, it is not allowed to start multiple UV lamps at the same time, otherwise, the air switch will be overloaded and tripped. It is necessary to start one by one, and the other lamp can be started only after the current of one lamp is stable
(4) Turn off the WV lamp and restart immediately. It is normal that the UV lamp does not light up. It can be turned on again after the UV lamp cools down
(5) In order to prevent abnormal or premature aging of UV lamp, the main switch power supply cannot be cut off immediately after the lamp is turned off. The power supply can only be turned off after the lamp tube cools down
(6) The luminous intensity of UV lamp will decay with the growth of time, so the user should change the lamp according to their actual use (the requirement of changing UV: turn off the main switch power first). Then open the cover door of the upper box, loosen the fastening screw of the power cord of the light box, and pull out the lamp box. To avoid the influence of bare hand operation on the curing effect of UV lamp, clean gloves must be worn before folding and assembling.)
(7) When the fan makes abnormal noise or stops running, do not continue to use the equipment to avoid burning the UV lamp and reflector
8) In case of serious failure of the equipment, the relevant person in charge of the company must be informed in time. It is not allowed to carry out mandatory maintenance or modification subjectively
(9) The capacity of customer's master switch should be greater than or equal to the capacity of our company's main switch

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours