The application is very popular and can be adapted to numerous forms, both linear and curved. It is used to produce mirrors and table tops.
The machining process requires precision and attention to detail, especially on glass that is thinner than 6 mm. In these cases, it has always been essential to use glass templates specific to each shape.
The template is impractical in terms of time but above all in terms of cost.
All of this led CMS to study a unique and innovative (patented) alternative: the NTS (No Template System). It is a component attached to the processing head of the machining center that eliminates the need for templates.
Adopting this solution brings with it considerable savings: up to 33% in time and up to 41% in material used!
Log in or register to post comments
Via del Lavoro, 1 22036 Erba CO Italy
Via Marcatutto 7, (Milano) Italy 20080 Albairate MI Italy
100 Schelkovskoye Highway, building 108, room 45 Moscow Moskva 105523 Russia
V. alla Porada, 188 20831 Seregno MB Italy
Via Fieramonti 1 04012 Cisterna di Latina LT Italy
3196 Thompson Road Fenton , MI 48430 United States
Ctra. Estación Km. 15.8 44415 Rubielos de Mora Teruel Spain
Peter Lisec Straße 1, 3353 Seitenstetten Austria
Changzhou Xingchen Industry Park Wujin Qu Changzhou Shi Jiangsu Sheng , 213119 China
Via Abbondanza 11/13 22070 Carbonate CO Italy
5 Atir Yeda st. Kfar Saba 4464305 Israel
Via per Monastier, 4 31056 Vallio di Roncade TV Italy
Via Del Lavoro Snc 64023 Mosciano Sant’Angelo TE Italy
Via Trieste, 13 20067 Tribiano MI Italy